CPAP therapy saves lives. The science is settled. But the masks — that is where millions of patients hit a wall they cannot get past.
Statistics on CPAP abandonment are sobering: roughly half of all prescribed users stop therapy within the first year. Ask those former users why, and the answers cluster around a familiar set of complaints. The mask causes facial pain. The headgear loosens through the night. Air leaks out at the bridge of the nose, or worse, straight into the eyes. Turning onto your side dislodges the entire apparatus. Wearing a rigid frame and elastic straps to bed feels, as one patient put it, like suiting up for a scuba dive.
Bleep Sleep was built to solve exactly this problem. The company produces FDA-cleared, headgear-free CPAP interfaces engineered from the ground up for the patients most likely to quit — and independent testing has now ranked their Eclipse interface number one overall among nasal CPAP options.
Here is everything you need to know.
Why Traditional CPAP Face Masks Fail So Many People
A clinical study of 120 CPAP users found that mask discomfort was cited by 62% of participants, air leaks by 58%, and feelings of confinement by 47%. Those are not edge cases — they are the majority experience.
The root cause is structural. Traditional CPAP face masks rely on straps and headgear to hold a seal under pressure. That works when everything is perfectly adjusted and you are lying still. It stops working when:
- The elastic loosens during the night
- You shift positions and the mask shifts with you
- You have a beard, sensitive skin, or a nasal bridge that does not match the mask geometry
- The pressure of the headgear triggers claustrophobia or anxiety
Beard wearers face a particularly sharp challenge: studies suggest that approximately 68% of men with facial hair struggle to maintain a reliable CPAP seal, since most mask cushions require smooth skin contact to seat correctly.
The workaround most manufacturers offer is more headgear, tighter straps, and thicker cushions. Bleep Sleep went in the opposite direction entirely.
How Eclipse Works: MagSeal Technology Explained
Eclipse is Bleep Sleep newest and most compact CPAP interface. It uses MagSeal technology — a magnetic frame connector that clicks onto a disposable adhesive interface called Halos in under a second. There is no headgear. There are no straps. There is no elastic band going around the back of your head.
Here is the four-step process each night:
- Skin prep: Clean the skin around your nostrils with a mild astringent to remove oils that would interfere with adhesion. DreamPreps cleansing pads are purpose-made for this step.
- Apply Halos: Halos are small, hypoallergenic adhesive pads that sit at the nostrils. Nothing inserts into the nose. The adhesive is surgical-grade, latex-free, PBA-free, and corn-free.
- Magnetic connection: The Eclipse Connector Kit clicks onto the stainless-steel ring embedded in the Halos with a magnetic snap. The connection is immediate and secure.
- Morning removal: Slide the Halos off and dispose of them. The magnetic frame is cleaned and reused.
Eclipse is over 35% smaller than other leading nasal pillow and nasal mask designs. Because the seal comes from adhesion rather than strap tension, there is nothing to loosen, shift, or press into your scalp during the night.
Independent testing on SleepHQ ranked Bleep Sleep number one overall among nasal interfaces, with Eclipse recording a leak rate of 1.68 liters per minute — among the lowest ever measured. The overall score was 97.67 out of 100.
Eclipse vs. a Traditional Nasal CPAP Mask
| Feature | Eclipse by Bleep Sleep | Typical Nasal Mask with Headgear |
|---|---|---|
| Headgear | None | Elastic straps, head wrap |
| Seal mechanism | MagSeal magnetic adhesive | Silicone cushion under strap tension |
| Leak source | Minimal (adhesive seal) | Strap loosening, cushion shift |
| Mask marks / strap lines | None | Common after full night |
| Beard compatibility | Works with approx. 2mm clearance | Often problematic |
| Application time | Under 30 seconds | 2 to 5 minutes adjusting fit |
| Side/stomach sleeping | Fully compatible | Often causes mask displacement |
| CPAP machine compatibility | All standard machines (16-inch tube included) | Machine-specific |
| Insurance coverage | Medicare and most private plans | Medicare and most private plans |
| Country of manufacture | 100% Made in USA | Varies |
Who Eclipse Is Designed For
Eclipse was specifically engineered for patients most likely to struggle with or abandon traditional CPAP masks:
- Side and stomach sleepers who constantly find their mask displaced or leaking by morning
- Beard wearers who cannot get a reliable cushion seal
- Patients with claustrophobia or anxiety triggered by headgear and straps
- Anyone with sensitive skin, nasal bridge breakdown, or irritation from mask cushion contact
- Active sleepers who wake up with the mask across the room
- People who have already given up on CPAP and are willing to try something genuinely different
One consideration: approximately 2% of users experience sensitivity to the adhesive tape. Bleep recommends testing a small piece of Halos adhesive on the inside of your arm before your first full night of use. If sensitivity occurs, a skin barrier prep such as Smith and Nephew SKIN-PREP or 3M Cavilon is available over the counter and resolves the issue for most patients.
Clinical Credentials and Insurance Coverage
Eclipse received FDA 510(k) clearance under reference number K172335. It carries HCPCS billing codes A7034 (nasal mask interface) and A7033 (nasal pillow cushions), making it eligible for reimbursement under Medicare and most private insurance plans when prescribed for obstructive sleep apnea.
The development of Eclipse was supported by a National Institutes of Health SBIR Phase II grant of $1,702,820 from the National Heart, Lung, and Blood Institute, awarded September 2021 through August 2023. That level of federal research investment reflects the clinical significance of the adherence problem Bleep Sleep is solving.
Eclipse and Halos are fully manufactured in the United States using US-sourced materials.
Patient Feedback
"Patients who have tried the Eclipse almost uniformly say it is a game changer. The comfort and airflow surpasses other sleep apnea masks they have tried."
— Dr. Daniel Monahan, UPMC Family Practitioner
"I noticed how lightweight and comfortable it was compared to my mask and I could sleep in any position. My sleep scores were 100 on MyAir app."
— Rachel N., Bleep Sleep Customer
"Six weeks after switching, my wife informed me that she is sleeping better. She is no longer waking up due to annoying mask leaks, or me constantly tossing and turning."
— Dave Amstutz, Bleep Sleep Customer
Where to Purchase
Bleep Sleep products are available at bleepsleep.com (HSA/FSA accepted), Amazon, Walmart, CPAP.com, and 1800CPAP. Insurance and DME fulfillment is available through Aeroflow, Lincare, Apria, Rotech, AdaptHealth, and Nationwide Medical. Veterans can access Eclipse through Carrier Medical and B&B Health Services.
Free shipping on orders over $80. Made in the USA.
Common Questions Answered
Will the adhesive hold all night?
Yes. Independent SleepHQ testing recorded a leak rate of 1.68 L/min — one of the lowest ever measured for any nasal interface. The surgical-grade adhesive holds through movement and position changes without requiring strap tension.
Does it work with all CPAP machines?
Yes. Eclipse comes with a 16-inch universal connecting tube compatible with all standard CPAP, APAP, and BiPAP machines through a standard 15mm connection.
Is it covered by insurance?
Yes. Eclipse qualifies under HCPCS codes A7034 and A7033 for Medicare and most private insurance plans when prescribed for obstructive sleep apnea.
What is the ongoing cost?
The Eclipse frame replaces every 90 days. Halos are nightly disposables — one box of 32 provides a 16-day supply. Both are covered under insurance billing codes.
Can someone with a beard use it?
Yes, provided there is approximately 2mm of smooth skin clearance around the nostril area where the Halos adhere.
Stuart Heatherington is the Founder and CEO of Bleep Sleep, a Chapel Hill, North Carolina based medical device company specializing in headgear-free CPAP interfaces for obstructive sleep apnea. For clinical inquiries or DME partnership questions, contact info@bleepsleep.com.
